Tuesday, March 27, 2012

The Hot Tub Saga

For some strange reason, I own a hot tub. When I bought the house, it seemed kind of cool. That lasted for about a year. Then, it became a headache. Finally, I drained it and unplugged it. That was a simplification. You can't just drain and unplug. There is no drain and there is no plug. I had to siphon the water out using a water hose, bleed the lines dry, then throw the breaker marked "spa" into an off position at the breaker box.

I did this about two years ago. Recently, due to circumstances beyond my control, I've been pressured to get the hot tub functional again. It's actually been fun. I've been working on my plumbing skills for when all the software jobs get farmed out to India. This was like practice for my second career.

A hot tub sitting out dry for the last two years does not just magically work with the addition of water. I mean, we tried that, but it immediately started leaking out of this strange metal attachment underneath the tub.

I had to do some research. I found this cool website called Spa Depot. They seem to have good prices on their parts, but even better than that is their instructions for how things work. I particularly like their Spa Simulator in the SpaCyclopedia.

Using the aforementioned Spa Simulator I was immediately able to determine that one of the pumps was leaking. Furthermore, by reading their instructions on pump repair, I determined that I would more than likely need a new pump. The rule of thumb is: if a pump is malfunctioning and is more than 3 years old, replace the entire pump.

The scary thing about my hot tub is I have two pumps. Both of the pumps are identical so one of them is not, what they call, a circulation pump. It's scary, because I don't think the other pump is working either. However, it's also not leaking. Pumps are going to cost around $250 no matter how you slice it. I've already ordered one.

When I first decided to do the work myself I thought I was going to have to buy some PVC pipe and some cement so I could cut the pipes and reattach the pump. Last Sunday when I finally decided to start working on it, I was surprised that this is not the case. There are plungers that work as valves on either side of the pump (the ejection side and the intake side). You close these two valves to keep water from coming out of the tub, then you unscrew the pump. Mine had been sitting out so long that I had to use some plumbing pliers to get things started on the ejection side, but the intake side I was able to remove by hand. That's not me in the picture. I wasn't taking pictures. But, you can see the valve and the twisty thing. I like calling things twisty.

Here's a picture of my removed leaky pump. I'm so proud. It's like a bouncing baby pump (that leaks). You can see the power cable to the left (kind of like an umbilical cord in my increasingly stupid analogy). I had to remove that so I can reuse it. Those puppies cost about $20.

I ordered a new pump from Spa Depot. I went from a 4 horsepower pump to a 3 horsepower pump. Maybe I'll regret it, but I doubt it. If anything the jets were too powerful before. It should be in by Friday and I'll update you on how the installation went. Because I know you will be very curious.

I'm hoping to install it into a section of the spa that's easier to get to. That one was a bitch to remove because of its location. Once I had it unscrewed I still had to manipulate it through a spaghetti mess of PVC piping. I guess plumbing is similar to coding.

I'm putting the odds at 90% that I'll be ordering another pump next week. Remind me to tell you about my less than $200 salt water conversion idea!

5 comments:

  1. Once you get to filling it, may be a good idea to superchlorinate it (ie. fill with water and a lot of chlorine) to run it for a couple of hours and then drain it - then refill with fresh water. And you probably want to buy a new filter too, - you will have a lot of fun once you get it working again!
    good luck,
    Steve

    ReplyDelete
  2. You should also check out http://www.hottubthings.com/. I buy all my spa supplies there and have been really happy with them.

    ReplyDelete
  3. I think getting a plumber is a good way to fix the problem. But visiting Spa Depot did help you learn how to fix the leaking valve, which can be very useful in the future. Sadly, you did not take a picture of what happened; it would have been great to see how you fixed the problem.

    ReplyDelete
  4. Darryl,
    Glad you enjoyed the story of my tree sap nightmare.
    I was worried about posting your comment at first because I thought it might be spam.
    But, the advertisement is so well hidden, I can't find it.

    ReplyDelete
  5. I think getting a plumber is a good way to fix the problem. But visiting Spa Depot did help you learn how to fix the leaking valve, which can be very useful in the future. Sadly, you did not take a picture of what happened; it would have been great to see how you fixed the problem.

    ReplyDelete